Categories
Garage Door

Garage Door Repair – The Steps to Success

Garage door repair is not as difficult as it sounds. Although, there is plenty of action which you can take before calling professional garage door repair services. Some garage door problems are simple enough which you can handle on your own even you don’t have any technical expertise. For major garage door problems, it is wise to hire a professional garage door repair expert like Charlotte’s best garage door repair company to handle them. It is also suggested by the garage door expert that by conducting garage door inspection and maintenance on a regular basis, you can avoid costly repairs. The garage door actually starts from the phase of installing a garage door. Setting a garage door with sufficient features will help you to reduce the number of repairs later on.

Right garage door dimensions: The minimum size of the garage door to park two vehicles is (24’ x 24’). A bigger roomy type of garage is 28’x28’ area. Garage door size is another important factor to be taken seriously. A standard garage door size is 9 feet wide and 7 feet high. This size of garage door is ideal to park cars, trucks, vans, and suburban. And the larger garage door is 10 feet wide and 8 feet high which is an appropriate choice for commercial setups. It is suggested that when you constructing your garage, use a standard size for garage door opening. Just constructing a few inches narrow or wider will need to make a customized garage door. This can become costly. While constructing a garage for larger vehicles, it must be noted here that the ceiling is constructed higher. A standard garage’s ceiling height is 8 feet high matches with a 7-foot high garage door, but an eight-foot-tall garage door needs 9 to 10-foot clearance inside the structure.

Professional Garage door repair: Garage door repair works start from inspecting the garage door tracks. If garage door tracks got dented, the door cannot run smoothly. You can use a rubber hammer to tap the dented trackback straight once again. The garage door is a combination of hardware, electric mechanism, and moving parts, therefore, the next step is to make sure if there are any loose screws, bolts, or nuts in the structure.

You can fix this problem simply using a screwdriver. The third important step is to inspect and clean the garage door roller to remove dirt and accumulated grease. And finally, check the position of the garage door opener and springs. Replaced the frayed garage door cables and restart the opener to reprogram it. Never touch the cables and garage door springs, if you are not familiar with the structure of the garage door.

Regular garage door maintenance and repair is essential to keep your garage door in good working order. If neglected due to any cause, sooner or later you will end up with costly garage door repair bills. Simple garage door inspection and maintenance should be conducted to keep it secure, functional, and prolong its life overall.

Categories
Garage Door Garage Door Spring

Techniques of Garage Door Spring Replacement

If you are struggling to open your garage door, it may have imbalanced or broken springs. In this situation, you should fix it by replacing the spring with a new one as soon as possible. Garage door spring repair is a very important garage improvement task. You can do it on your own but there are many factors you should keep in mind to complete this task. If you are not experienced handyperson then leave it to the professional like, Chula Vista, California garage door spring replacement services. They have trained staff and up-to-date tools to get the job done.

If your garage door is in closing position and the spring breaks, you will need to open it manually. You can take help of your friends because the door will be heavy. To open the door, lift it up and set it in its opening position. It is compulsory to keep the spring in relaxing mode so that they are not under tension or stretched. For this purpose, you have to disengage the locks from the chain mechanism.

Once you opened the door successfully, put a pair of vise grips to a particular track on the side with damaged spring. Attach it under the roller of the door. It will grip the door and prevent it from falling down. Remove the broken spring and check the pulleys. Verify whether they are in good working conditions or not. If the bearings or pulleys are damaged, they should be fixed or replaced as well.  

It’s time to measure the width of the spring. Take the measurement to the supplier to buy a new spring. Make sure that you got the springs that are similar in diameter and length. Put the new spring on the door and attach the cables on the pulleys to give it tension. Be careful, the cable should not be stretched more than 1 inch. Efficient garage door spring replacement would demand to change both springs at once. You have to use the spring with similar strength.  

Remove the grip from track and reattach the lock to the chain to close the door. If your testing is fail and door does not close properly. You should recheck the setting to let the door close completely. Testing the door after garage door spring repair will make you able to determine the issue if the springs are too tight or too loose.