Garage Door Garage Door Spring

Techniques of Garage Door Spring Replacement

If you are struggling to open your garage door, it may have imbalanced or broken springs. In this situation, you should fix it by replacing the spring with a new one as soon as possible. Garage door spring repair is a very important garage improvement task. You can do it on your own but there are many factors you should keep in mind to complete this task. If you are not experienced handyperson then leave it to the professional like, Chula Vista, California garage door spring replacement services. They have trained staff and up-to-date tools to get the job done.

If your garage door is in closing position and the spring breaks, you will need to open it manually. You can take help of your friends because the door will be heavy. To open the door, lift it up and set it in its opening position. It is compulsory to keep the spring in relaxing mode so that they are not under tension or stretched. For this purpose, you have to disengage the locks from the chain mechanism.

Once you opened the door successfully, put a pair of vise grips to a particular track on the side with damaged spring. Attach it under the roller of the door. It will grip the door and prevent it from falling down. Remove the broken spring and check the pulleys. Verify whether they are in good working conditions or not. If the bearings or pulleys are damaged, they should be fixed or replaced as well.  

It’s time to measure the width of the spring. Take the measurement to the supplier to buy a new spring. Make sure that you got the springs that are similar in diameter and length. Put the new spring on the door and attach the cables on the pulleys to give it tension. Be careful, the cable should not be stretched more than 1 inch. Efficient garage door spring replacement would demand to change both springs at once. You have to use the spring with similar strength.  

Remove the grip from track and reattach the lock to the chain to close the door. If your testing is fail and door does not close properly. You should recheck the setting to let the door close completely. Testing the door after garage door spring repair will make you able to determine the issue if the springs are too tight or too loose.